MPPT0850-DCLI

8A MPPT SOLAR STREET LIGHT CONTROLLER

MPPT, 8A, 12V.Max input power 100W~120W,Max PV 35V.
LED driver built in,LED power 1W~50W
LED display,Infrared remote control
For lead acid battery and lithium battery
Mppt charge controller with motion sensor

MPPT-DC series intelligent MPPT solar controller is programmable and especially for boost mode LED solar street light system. It includes constant current driver function. The charging efficiency is about 20% higher than the traditional PWM controller, which can drop the cost of the whole system.

  • Innovative Max Power Point Tracking(MPPT) technology, tracking efficiency >99.9%
  • Full digital technology, high charge conversion efficiency up to 97.5%, discharge conversion efficiency up to 96.5%
  • Can output constant current (output current can be set)
  • Can read parameters and running status
  • If battery voltage is low, it can be set to dimming
  • Dimming start voltage and percentage can be set
  • Day/Night threshold can adjust automatically
  • When BMS power off because of LVD, it can activate the system automatically
  • External temperature sensor, automatic temperature compensation(AGM, Liquid and GEL)
  • Four stages charge way: MPPT, boost, equalization, float
  • IP67, Strong and durable aluminum caseFull automatic electronic protect function





Item MPPT0850-DCLi
Battery Parameters System Voltage 12V
Max Charging Current 8A
Max volt on Bat. Terminal 25V
Battery Type Liquid, Gel, AGM and Lithium(Programmable, default: Lithium)
Liquid, Gel, AGM MPPT Charging Voltage <14.5V@25℃ 
Boost Voltage 14.5V @25℃
Equalization Voltage 14.8V @25℃(Liquid, AGM)
Float Voltage 13.7V @25℃
Low Volt. Disconnect 10.8~11.8V(Programmable)
Reconnect Voltage 11.4~12.8V(Programmable)
Overcharge Protect 15.5V
Temp. Compensation -4.17mV/K per cell (Boost, Equalization), -3.33mV/K per cell (Float)
Lithium Charging voltage target 10.0~17.0V(Programmable, default: 12.6V)
Charging voltage recovery 9.2~16.8V(Programmable, default: 12.4V)
Low voltage disconnect  9.0~15.0V(Programmable, default: 9.0V)
Low voltage reconnect  9.6~16.0V (Programmable, default: 9.8V)
0℃ Charging protection Yes, Slow, No(Programmable)
Panel Parameters Max volt on PV terminal    *1    35V
Max input power   100W~120W
Dusk/Dawn detect volt. 3.0~8.0V (Programmable)
Day/Night delay time 0~30min(Programmable)
MPPT tracking range (Battery Voltage +1.0V)~Voc*0.9   *2   
Load Parameters Output Power 1~50W
Output Voltage 20~35V
Current setting range 0.15~3.0A(Programmable)
Min current 100mA(Dimming)
Current precision ±2%
Dimming 0~100%(Programmable)
Voltage of start dimming 11.8~12.5V(Gel,AGM and Liquid); 10.0~17.0V(Lithium)
Dimming percentage 1~20%(Programmable)
System Parameters Max tracking efficiency >99.9%
Max charge conversion 96.5%
Max LED driver efficiency 96%
Motion sensor IR(optional)
Self consumption 6mA
Dimensions 85.8*63*23.1mm
Weight 230g
Ambient temperature -35~+60℃
Ambient humidity 0~100%RH
Protection degree IP67
Max Altitude 4000m

*1.This value represents the maximum voltage of the solar panel at the minimum operating ambient temperature

*2.Voc means the open circuit voltage of the solar panel..




Application scenariosMORE >

MPPT1575-DCLI

> Read More

MPPT1575-DCLI

> Read More

MPPT1050-DCLI

> Read More

MPPT2075-DCLI

> Read More